Protec Technical - vacancies

CERTIFICATION AND TEST ENGINEER J11140

Purpose:
To generate plans, conduct, witness and report results for qualification and certification of the company's product.
Responsibilities:
The Test & Certification Engineer derives his authority from the Head of Engineering and is responsible to the Certification Manager.
Is responsible for test planning, undertaking tests and producing the relevant test plans and reports to the specification & Regulation required. These tests include, but are not limited to, mechanical strength tests, flammability tests, fire containment tests, refrigeration, ventilation, endurance, environmental, function and acceptance tests.
Is to ensure that all test plans and test reports produced are accurate and are checked, filed and maintained in a satisfactory manner.
To provide support and documentation for determining FMEA, FAL, HASS and HALT documentation.
Is to demonstrate an appropriate level of numerical and verbal reasoning skills.

Experience in Aircraft Interiors Certification and Testing requirements.

Experience in Structural, Function, Substantiation Testing. Knowledge of MTBF/HASS/HALT assessments is an advantage.
Overall Interiors product knowledge (i.e. Galleys, Video Control Centre’s, Crew Rests, Lavatories, Passenger Service Units, Overhead bins, ceiling and wall panels)
Qualifications to degree level or appropriate experience (minimum relevant 3 years)
Have good communicative skills.
Other:
Willingness and ability to travel within the UK and abroad, sometimes at short notice and extended periods.
Promote the interests and image of the company at all times.



Certification and Test Engineer Ref: J11140 CERTIFICATION AND TEST ENGINEER J11140 Purpose: To generate plans, conduct, witness and report results for qualification and certification of the company's product. Responsibilities: The Test & Certification Engineer derives his authority from the Head of Engineering and is responsible to the Certification Manager. Is responsible for test planning, undertaking tests and producing the relevant test plans and reports to the specification & Regulation required. These tests include, but are not limited to, mechanical strength tests, flammability tests, fire containment tests, refrigeration, ventilation, endurance, environmental, function and acceptance tests. Is to ensure that all test plans and test reports produced are accurate and are checked, filed and maintained in a satisfactory manner. To provide support and documentation for determining FMEA, FAL, HASS and HALT documentation. Is to demonstrate an appropriate level of numerical and verbal reasoning skills. Skills and Experience required: Experience in Aircraft Interiors Certification and Testing requirements. Experience in Structural, Function, Substantiation Testing. Knowledge of MTBF/HASS/HALT assessments is an advantage. Overall Interiors product knowledge (i.e. Galleys, Video Control Centre’s, Crew Rests, Lavatories, Passenger Service Units, Overhead bins, ceiling and wall panels) Qualifications to degree level or appropriate experience (minimum relevant 3 years) Have good communicative skills. Other: Willingness and ability to travel within the UK and abroad, sometimes at short notice and extended periods. Promote the interests and image of the company at all times. Salary: £34K - £37K PER ANNUM Location: Home Counties and South Coast Home \| About Us \| Vacancies \| Employers \| Contact Us
Contact Alan Biddlecombe on 01329 232 221 or email to a.biddlecombe@protectechnical.co.uk	Click here to Email your enquiry (please attach your CV)